• Home
  • IoT Motorhome
    • The Electronics
      • Core ESP01 Hardware Setup
      • Core Software and Features
      • Clock and timers
      • INA219 - voltage and current measurement
      • INA3221 - triple voltage and current
      • BMP280 - Temperature and Pressure
      • PCF8574 - On/Off inputs and outputs
      • PCF8591 - Voltage In/Out
      • ADS1115 - Precision voltage
      • MCP4725 - Voltage Output
      • EPsolar or EPever Modbus Interface
      • ESP01 Relays
      • DS18B20 - Temperature Sensor
      • DHT11 - Temperature and Humidity
      • BME280 - Temp, Pressure and Humidity
    • The Implementations
    • Central controller and History
    • Fridge Controller
      • Description
      • A replacement design
      • Construction
      • Using a domestic fridge in a motorhome
  • Workbench Project Boxes
    • Project Board
    • Version 1
      • Cutting the pieces
      • Fixing together
      • The power supply V1
      • Cutting for inlets and PSU case
      • Finishing the externals
      • Painting and PSU assembly
      • The Console V1
    • Version 1.5
      • The power supply V1.5
      • New PSU panel and console
      • The wiring
      • 3D printer parts
      • The Electronics
      • Arduino Code
    • Version 2
  • General Projects
    • Making Multiway Cables and Connectors
    • Trailer lift
    • FrankenDVD
    • Class A Amplifier
    • Cabin Solar Power
    • PreAmp
    • Wall Display
    • Dell Poweredge T40 Server OS Load
    • Roland Cube 100 Bass Repair
  • Motorhome
    • Build a DIY Motorhome
      • Choosing a vehicle
      • Accommodation
    • Components
      • Wood
      • Kitchen
      • Kitchen - Frame and worktop
      • Kitchen - Fridge
      • Kitchen - Hob/Oven
      • Kitchen - Sink
      • Plumbing
      • Plumbing - Tanks
      • Plumbing - Fresh Water
      • Plumbing - Waste Water
      • Plumbing - Problems
      • Electrics
      • Electrics - 12V
      • Electrics - Solar Power
      • Electrics - CBE PC-200
      • Electrics - 240v Mains
      • Electrics - Solar Power Try 1
      • Electrics - Solar Power Try 2
      • Electrics - Solar Power Fine Tuning
      • Electrics - B2B charging
      • Soft stuff
      • Odds and Ends
    • The Build
      • A plan
      • A workbench
      • So we bought a van
      • First some windows
      • First fittings
      • Doing the basics
      • Insulation
      • Holes
      • Battening
      • More insulation
      • Ply Lining
      • Skylight boxes
      • Furniture and Fittings
      • Bed and boxes
      • Bed slats and fridge
      • Kitchen continued
      • Holes and wood cutting
      • A seat is born
      • Worktop
      • Holes and wiring
      • Frames, Cupboards and Cladding
      • Frames and Carpet
      • Cupboards
      • Cladding
      • Wiring and heating
      • First plumbing and cladding
      • More cladding
      • Yet more cladding and bed cover
      • Waste plumbing and wires
      • And more plumbing
      • Electrics
      • First trip away
      • First Finish
      • Gas Locker
      • Water Heater
      • Heater, Joists and Drawer
      • Gas, Floor and Plumbing
      • Gas 2 and going away
      • Cycle Rack
      • Off on hols
      • Final Stretch
      • Picking up the bathroom
      • Bathroom
      • Finishing Off
      • DVLA
      • What to do next?
      • What we did next!
    • Links
      • General Advice Links
      • Traveling Advice Links
      • Sprinter Sites
      • General Suppliers
      • Components
      • DIY Info and Ideas
      • The Professionals
    • Guestbook
    • Contact
  • Midi Melodeon
    • The idea
    • Initial construction
    • First working prototype
    • Version one completed
  • Home
  • IoT Motorhome
  • Workbench Project Boxes
  • General Projects
  • Motorhome
  • Midi Melodeon

Final Stretch

After be came back from holiday, we set out to finish what we had started, to build a motorhome. The target was to get the bathroom finished before we went to Towersey Village Festival at the end of August, with the intention that we would have the luxury of not having to queue for a shower, or a working toilet, and be able to turn up on site and open a can/bottle/instrument case without a host of other boring chores first.

  • Build a DIY Motorhome
  • Components
  • The Build
    • A plan
    • A workbench
    • So we bought a van
    • First some windows
    • First fittings
    • Doing the basics
    • Insulation
    • Holes
    • Battening
    • More insulation
    • Ply Lining
    • Skylight boxes
    • Furniture and Fittings
    • Bed and boxes
    • Bed slats and fridge
    • Kitchen continued
    • Holes and wood cutting
    • A seat is born
    • Worktop
    • Holes and wiring
    • Frames, Cupboards and Cladding
    • Frames and Carpet
    • Cupboards
    • Cladding
    • Wiring and heating
    • First plumbing and cladding
    • More cladding
    • Yet more cladding and bed cover
    • Waste plumbing and wires
    • And more plumbing
    • Electrics
    • First trip away
    • First Finish
    • Gas Locker
    • Water Heater
    • Heater, Joists and Drawer
    • Gas, Floor and Plumbing
    • Gas 2 and going away
    • Cycle Rack
    • Off on hols
    • Final Stretch
    • Picking up the bathroom
    • Bathroom
    • Finishing Off
    • DVLA
    • What to do next?
    • What we did next!
  • Links
  • Guestbook
  • Contact

About | Privacy Policy | Sitemap
Log out | Edit
  • Scroll to top